FOC Grimlock

Dino mode...
Right side view. Original figure on the top, custom figure on the bottom.

This one is a COMPLETE repaint. I painted all the grey sections silver and all yellow sections gold. I then added a wash of darkened silver to the silver areas and a wash of dark brown to the gold areas to bring out the panel line details. I also added more red detail areas (as well as many other details) based on screenshots from the Fall of Cybertron game. Finally, I dry-brushed brown around the bottoms of both dino and robot mode feet to simulate dirt and general weathering.

Back view. Original figure on the top, custom figure on the bottom.

You will notice that my custom figure has some extra silver and red rings on the underside of the tail. These are plastic cap pieces that I cut, glued on, and painted. I show these in better detail later on.



Left side view. Original figure on the top, custom figure on the bottom.


Front view. Original figure on the top, custom figure on the bottom.


Top view. Original figure on the left, custom figure on the right.


Bottom view. Original figure on the left, custom figure on the right.

Now, Grimlock's underbelly is empty in dino mode due to his transformation. Eventually, I will be getting the 3rd party "Zenith Forge ZF-001: Cretaceous Advancement set" which provides an underbelly piece to be plugged in.





Robot mode...
Front view. Original figure on the left, custom figure on the right. I also switched his lower body to a dark red, instead of the half yellow, half grey, it was before.


Right side view. Original figure on the left, custom figure on the right.


Back view. Original figure on the left, custom figure on the right.


Left side view. Original figure on the left, custom figure on the right.


Close up of the side leg detail. Original figure on the left, custom figure on the right.

Close up on the back leg detail. Here, I added cut pieces of plastic cap to make the rings on the back of Grimlock's legs (bottom of t-rex tail). Original figure on the top, custom figure on the bottom.